Health and optical clinics may be regulated by multiple agencies, including: Environmental Protection Agency (EPA), Food and Drug Administration (FDA), Department of Transportation (DOT), Drug Enforcement Administration (DEA), Occupational Safety and Health Administration (OSHA), State Environmental Protection Agencies, State Pharmacy Boards, and potentially local Publicly Owned Treatment Works (POTW).
Waste is the main environmental issue, and the primary compliance consideration is to determine the type of waste in order to identify what regulations apply, how it must be handled, and if it must be managed as a hazardous waste.
Some pharmaceutical wastes are considered hazardous wastes, and some are also regulated as controlled substances by the Drug Enforcement Agency and/or its state counterparts. The proper identification and management of pharmaceutical waste is addressed on
CRC's Pharmacy Department page.
For other potentially hazardous wastes, information on
Managing Hazardous Waste is available from the Healthcare Environmental Resource Center (HERC) and on the
CRC Hazardous Waste page.
Medical wastes such as bandages, culture dishes, discarded surgical gloves, instruments or lancets,
medical sharps (e.g., needles to give shots or draw blood), swabs, and other materials contaminated by bodily fluids are generally regulated at the state and local level. The
CRC Other Regulated Waste page has more information on handling medical waste. In some states, administrative controls, such as California's medical waste management plans, are required.
Certain types of infectious medical waste may also be subject to federal requirements for transportation. The Healthcare Environmental Resource Center has more information on
DOT regulations for medical waste, and the DOT has guidance on
transporting infectious substances.
Approximately 80% of the eyeglasses worn today have plastic lenses. Both plastic and glass lenses are produced by successive stages of fine grinding, polishing, and shaping. Various lens treatments and tints can be added after the lenses are shaped and then inserted in the frames. Wastes generated from this process include wastewater, dusts, and metallic scrap, including lead from the blocking process. The manufacture of glasses is regulated by the FDA.
Automated machinery is used in most of the processes involved in eyeglass manufacturing, and these machines use water in the grinding and polishing processes. Wastes generated can include: lead-bearing lens blocking alloy; alkaline wastewater from grinding, polishing, and blocking operations; spent solvent from tool cleaning operations; and ground glass or plastic fines (non-hazardous).
Lead-bearing wastes, alkaline wastewaters, and spent solvents could potentially be regulated as hazardous wastes. Alkaline wastewaters may also be subject to Clean Water Act regulation. Such wastewaters contain both particulates (e.g., glass or plastic fines, and metals, such as lead) and dissolved metals. Depending on the quantities discharged per month and the local POTW requirements, it may be possible to discharge this wastewater directly to the municipal sewer system.
There are resources for how to make health care more sustainable, including Practice Greenhealth and the Green Guide for Health Care.
The environmental impacts of lens manufacturing can be reduced in a number of ways: